Deciding On A Trim Design For My Studio Cupboard Doorways & Drawer Fronts

Two days in the past, I went to Dwelling Depot and acquired a complete bunch of small trim in order that I might add a trim design to all of my IKEA Veddinge doorways and drawer fronts for the studio cupboards. Yesterday, I returned all of that trim. 😀 After giving it some thought, I made a decision to order Overlays for these cupboards. I hate that I didn’t make that call till yesterday, as a result of now that can delay the completion of my cupboards. However I actually like the thought of utilizing exact laser minimize designs to decorate up these cupboards over chopping 100 little items of trim and attempting to attach them on exactly. I’ve executed that earlier than many instances, and it’s doable, however I simply need to strive one thing totally different this time.

So if you happen to’re new to this studio challenge, that is what I’m working with. I’ve an extended 20-foot wall with decrease IKEA Sektion cupboards the complete width of the wall, after which on the outer sections, I’ll be including 60-inch-high higher cupboards which can cowl the areas of the wall with out wallpaper.

I’ll be portray the doorways and drawer fronts after they’re trimmed out, so I haven’t been in a rush to get these placed on simply but. However listed below are the small print of what I purchased. The entire #2 cupboards are 30-inch-wide, two door cupboards with cabinets. The #3 cupboards are 36-inch-wide, three-drawer cupboards. And the one #4 cupboard is a six-drawer, 36-inch-wide cupboard.

After taking a look at the entire Overlay designs, I’ve determined to go together with the Anne panels, which seem like this…

I’ve been attempting to resolve precisely how I would like the Overlays to look on my cupboards. I made a decision nearly instantly that I didn’t desire a separate Overlay panel for every particular person door and drawer entrance. I believe that may begin to look too busy on such an extended wall with a lot occurring. So I do know that not less than for the 4 double door cupboards, I would like one Overlay Anne panel to cowl each doorways, minimize within the center in order that the doorways will open correctly.

However past that, I don’t know. I’ve provide you with three totally different choices for the drawer sections, and I can’t resolve which one I like probably the most.

Possibility 1 – One panel per part

That is what I had initially thought simply to maintain issues from wanting too busy. I deliberate to make use of one panel (which I’ve proven in darker pink/crimson as a result of my cupboards will all be painted the identical coloration after the panels are hooked up) per cupboard part. That implies that one panel would span the double door sections, in addition to the three-drawer sections, and the center six-drawer part.

I do know it’s arduous to see the element on a mock up of such an extended wall, so right here’s a peek at simply the left half of the mock up, which reveals the complete panel on all three varieties of cupboards.

I used to be positive that’s what I wished till I noticed the mock up, and now I’m not so positive. Whereas I didn’t need it wanting too busy, I nearly surprise if that’s too plain. So then I attempted one thing totally different for the drawers.

Possibility 2 – One panel per door part, giant drawers handled individually

I like that this one mixes issues up a bit. This will get away from that plain, everything-the-same look that Possibility 1 gave me, and I don’t assume it seems to be too busy. I wasn’t positive about that center drawer part (these drawers fronts are solely 5 inches excessive), so I attempted out utilizing the identical dimension panel on these as are on the bigger drawers.

And as soon as once more, right here’s a better have a look at simply the left half the place you possibly can see the design on all three varieties of cupboards.

However I did discover that they promote Anne panels that space very quick (like 3 inches excessive) and really large, so that they’re for issues similar to my center drawers. And that leads me to…

Possibility 3 – One panel per door part, all drawers handled individually

I made a decision to present it a strive, and I actually prefer it! I like these small heart drawers, so I actually do like the thought of them being seen by having their very own particular person panels.

Right here’s a closeup have a look at simply the left half displaying the three totally different cupboard sorts.

So I believe these are the three choices, with my favorites being #2 and #3. I simply can’t resolve! It’s that center cupboard with the six drawers that’s the large query for me, and it’s as a result of if I do particular person panels, the corners on these actually quick panels would essentially must be a unique (smaller) dimension than all the remainder of the panels simply in order that they will match on these quick 5-inch-high drawer fronts. And I’m simply unsure how I really feel about that. Would that look cohesive? Or would these smaller corners stick out and never seem like they belong?

Clearly, no matter I do on this lengthy wall will likely be replicated on the opposite wall. However that wall is straightforward since there are not any sections with actually quick drawers. Inform me your ideas!